CERABOND X technology - revolution in the grinding and cutting process

100% performance from the first to the last grind - that is the promise of the innovative CERABOND X technology from Tyrolit. This ground-breaking development is based on a perfect match between the high-performance ceramic grain and the bond used.

5 min read

100% performance from the first to the last grind - that is the promise of the innovative CERABOND X technology from Tyrolit. This ground-breaking development is based on a perfect match between the high-performance ceramic grain and the bond used. The result: significantly improved efficiency of your tools, less wear and a significant increase in performance.

Without CERABOND X

All of the abrasive grains break out, the tool dulls and the grinding performance diminishes rapidly.

With CERABOND X

The ceramic grains break off and form new, aggressive edges with long-lasting, constant sharpness.

CERABOND X Anwendungsbild

Why CERABOND X?

With conventional abrasives, the abrasive grains detach from the grinding wheel as a whole, causing it to dull quickly. CERABOND X technology, on the other hand, ensures that the specially developed ceramic grain remains stable. Instead of rounding off or wearing away, the grit breaks off in a targeted manner and forms new edges for a constant sharpness - for a longer service life and unparalleled sanding performance.

The four decisive advantages of CERABOND X:

  • Fast and effective work - More performance in less time
  • Optimum cost-benefit ratio - more cuts, fewer changes
  • Unbeatable performance with long tool life - Reduced material consumption
  • Minimal wear & higher efficiency - Fewer interruptions, more productivity

Tool School - CERABOND X: Products at the highest level


The strongest cutting performance on the market

With the new CERABOND X cut-off wheel for steel and stainless steel, Tyrolit is setting new standards in metalworking. Never before has it been possible to work so quickly, precisely and efficiently with a cut-off wheel.

Your advantages at a glance:

  • 25% more cuts than the competitor product
  • Longer service life, fewer wheel changes
  • Maximum cutting performance thanks to self-sharpening ceramic grain and innovative bond

The CERABOND X cut-off wheel is not only optimized for steel and stainless steel, but is also available in special versions for cast iron and rails. It sets new standards for cutting a wide range of materials.

To the CERABOND X assortment

Further high-performance products with CERABOND X technology

Conclusion: A new era for cutting and grinding

With CERABOND X technology, Tyrolit is ushering in a new era. Benefit from unprecedented performance and efficiency in your day-to-day work. Discover the full potential of this revolutionary grinding and cutting technology now!

To the CERABOND X assortment

Tyrolit Stories

This might also interest you